|
ENGINEERING SERVICES - H/RI PRODUCT
Original Steering System installation using many loose components
connected together by hose and fittings. Substantial power losses
were incurred due to the large amount of heat generation developed by the
multiple fittings and restrictions. Note also that many of the components and end
fittings were not even intended for marine use as indicated by the corrosion.
The amount of unsupported hose would eventually break the fittings,
causing a complete steering system faultier with no back up method to
return home.

The loose components were replaced with the H0071 Integrated Manifold
shown below. Piping was replaced as necessary to bring this application
up to acceptable standards. Reliability as well as efficiency was
increased. In addition, back up steering has been provided so
that in case of any partial system failure, there is an emergency
system.

Integrated ASD Steering, ASD
Trim and Trim Tab Control System furnished by H/RI.
|